We build Race cycles after customers request or according to special targeted applications.

This sample shows a 996 SPS with appropriate Tuning. The chassis is an original SPS framework with magnesium Race swingarm and the appropriate Öhlins rear damper and Öhlins front fork. Brake calipers are Brembos with a radial master cylinder. The magnesium rims are made by Marvic. Fuel tank is handmade from aluminum. A digital cockpit informs about all relevant RPM´s, pressures and temperatures. Of course aluminum rear frame and front fairing support. A dry battery was used. The engine is modified in every detail (small 150 Watt generator, all parts drilled, polished and lightened or replaced by aluminum parts). Cylinder heads are equipped with 38-32 mm valves and head porting is done. Ducati Race cams operating. A big Carbon airbox with more volume and a 54mm injection body take care about supply. Cooled by a Racing water cooler with higher performance. A P08 computer with two sensors and adapted mapping provides for the appropriate conversion. The disposal of the exhaust gases takes over by a 60mm Akrapovic system. Total weight including liquids 169 Kg!!! (14 litre fuel = 14 Kg and 3,5 litre oil = 3,5 Kg)

Here the dyno results:
Diagram HP
Diagram Nm