deutsch english
Willkommen bei Ducati Aprilia Kämna!
(0 Artikel) - 0,00 €

Du hast keine Artikel im Warenkorb.

section

>

Kanalbearbeitung 47-41/1000/1100 ccm Motoren 2 V, Paar Zoom

Kanalbearbeitung 47-41/1000/1100 ccm Motoren 2 V, Paar

Artikelnummer: 79910
Kanalbearbeitung 47-41/1000/1100 ccm Motoren 2 V, Paar
Hersteller/Marke:

Lieferzeit: 2-3 Tage

Preis auf Anfrage zzgl. Versandkosten
Artikelbeschreibung

    Details

    Zylinderkopfoptimierung für die Modelle SS i.e., Monster, Multistrada, Hypermotard und Sport Classic.

    Die Köpfe werden mit neuen Ventilführungen aus Sonderbronze im Ein-und Auslass und neuen Nimonic 80A Ventilen (Einlass 47mm, Auslass 41mm). Die Kanäle werden Strömungsoptimiert bearbeitet.

    Die Kanäle werden immer nach neuesten Erkenntnissen bearbeitet.

    Die Ventilsitzkontur wird immer auf das entsprechende Ventil profilgefräst, so dass hohe Durchflüsse bei größtmöglicher Durchflußgeschwindigkeit gewährleistet bleiben.

    Die Köpfe werden fertig eingestellt zurückgeliefert.

    Preis pro Satz inkl. Material.

    Bitte schicke deine Köpfe zur Bearbeitung ein

Product's Review
    1. It goes until the rev limitter, it doesn't stop pulling Kundenmeinung von Piet
      Gesamteindruck

      Hello Hauke,

      The install of the heads went well.
      2 weeks ago i had the first ride on my Hypermotard again. And it was superb, the ride is very smooth. Throttle response is very nice.
      And the power and the torque is really good, i can really feel the difference. It goes until the rev limitter, it doesn't stop pulling.
      This is the way i like my Hyper.
      I'm gonna have it sorted out on the Dyno, so then i also know the torque and power it produces. And i can see the curve. It's more important to me the way the power is beeing delivered, than the absolute amount of power. And i think this will be a nice smooth curve.

      Thanx for the nice job.

      When i have a print from the dyno, i will let you know.

      Kind Regards,

      Piet
      (Veröffentlicht am 02.05.2018)

    2. TOP !!! Kundenmeinung von 4 Takt Studio Konstanz, Rainer
      Gesamteindruck

      Hallo
      danke euch für die Mühe wo ihr mit mir gehabt hattet
      alles Prima gelaufen, bin sehr zufrieden mit euch ,u. den tollen Zylinderköpfen (47-41/2V)!
      einen schönen gruss vom Rainer aus Konstanz
      (Veröffentlicht am 23.02.2018)

    3. Tuning 47-41 aso. Kundenmeinung von Italy Mancinelli,Italy
      Gesamteindruck

      > Hello , Rudiger ,how are you?
      > At Vallelunga I tested the bike on the dyno and I remapped the ECU . You have attached the results .
      > Big smiles !!!!
      > Thanks and see you soon .

      Italo
      (Veröffentlicht am 15.07.2016)

    4. looking Great ! Kundenmeinung von Adam
      Gesamteindruck

      Hi Rudiger and Hauke.

      The package arrived yesterday, no problems with customs! Thank you very much, everything looks great!

      I'll keep you informed on how things are going. I'll probably ride for a bit before fitting the new heads and pistons to make sure I get all the bugs out.

      Thanks again for all your efforts. I'll send pics and dyno report as it comes along.

      Regards, Adam. (Veröffentlicht am 03.11.2014)

    5. sehr schön ! Kundenmeinung von Michi
      Gesamteindruck

      Hallo rüdi; hast meine hyper ja mächtig flott gemacht !! (Veröffentlicht am 15.10.2014)

    6. Ich bin total begeistert!!! Kundenmeinung von Wolfgang
      Gesamteindruck

      Hallo Hauke,



      die Köpfe sind angekommen und montiert, bin total BEGEISTERT!

      Motor läuft tadellos und hat richtig biss……. so wie von euch versprochen.

      Danke für die SUPER Abwicklung und alles andere was noch im Paket war.

      Coole Geschichte mit den Bildern, werde euch wärmstens empfehlen!





      Schöne Grüße von einem zufriedenen und überglücklichen Kunden J



      Mit freundlichen Grüßen



      Wolfgang (Veröffentlicht am 07.04.2014)

    7. Comments to your headporting Kundenmeinung von Rob Scheuer, GB
      Gesamteindruck

      Hi Rudiger/Hauke

      I have yet to dyno the bike, but have located a facility that can work with my Ultimap ECU. I will of course let you know the results.
      After running in and spending three days on track in Cartagena, I am very happy! the bike is fast and I think makes easily more than 100BHP.


      thanks again
      Rob Scheuer (Veröffentlicht am 04.12.2013)

    8. Thank you for your prompt resp... Kundenmeinung von Steve Alvey,Canada
      Gesamteindruck

      Thank you for your prompt response. I have looked into shipping to Ottersberg, Germany via UPS, and the cheapest rate is about Euro 275 – EACH way – more than I can pay you for your excellent work! Best regards, Steve Alvey (Veröffentlicht am 20.03.2012)

    9. Kommentar zu 47-41 Porting: M... Kundenmeinung von Peter Lämmermann,Deutschland
      Gesamteindruck

      Kommentar zu 47-41 Porting: Moin großer Meister :-) hab mir meinen Motor jetzt mal näher angesehen und die fotos beguckt. Also, von Kanalbearbeitung hast echt Ahnung, das is große Klasse. Hab damals in die Motoren der V8 DTM Audis Ende der 80-er glotzen können, die waren nicht so liebevoll bearbeitet. Werde berichten, wie sich das dann anfühlt... LG und bis bald Lämmi (Veröffentlicht am 23.11.2011)

    10. Comment for Headporting 47-41 ... Kundenmeinung von Johann Favennec,France
      Gesamteindruck

      Comment for Headporting 47-41 and crank balancing: Hello Rudiger, Yes, all ok, happy with the job on all parts. It was difficult to get the parcel, the French post is very badly organized!!! I will not polish the exhausts channels on the heads because your job is very good. I am working on the cranck cases to adapt 848 swingarm on the machine... Soon, I will give you a new order for parts - pistons and ECU solution. I would need your advise for ECU please! For the moment I have no ECU at all but a wiring loom for S4 and a wiring loom for Siemens from 1100 M. Best regards, Johan (Veröffentlicht am 28.03.2011)

    11. Kommentar zu Mototuning 1100 M... Kundenmeinung von Konstantin Vajanos,Deutschland
      Gesamteindruck

      Kommentar zu Mototuning 1100 Multi: P.S. Deine Multilala ging abartig, so einen schönen Motorlauf habe ich seit Jahren nicht mehr erlebt. Schön gemacht :-) (Veröffentlicht am 20.09.2010)

    12. Kommentar zu Headporting 47-41... Kundenmeinung von Sascha Haase ,Deutschland
      Gesamteindruck

      Kommentar zu Headporting 47-41,1100 Big Bore, Power Commander Abstimmung: Moin Rüdiger! Ja, läuft super! Vielleicht noch eine Lösung für mehr und vor allem bessere Ölkühlung, und ansonsten in erster Linie üben ! Aber danke der Nachfrage - werde bald vorbeizukommen. Grüße zurück! Sascha (Veröffentlicht am 22.04.2010)

    13. Kommentar zu Tuning 1000 Hyper... Kundenmeinung von Tony Spiesz,Wien
      Gesamteindruck

      Kommentar zu Tuning 1000 Hyper: das kein irrtum entsteht, motor bestückt mit hc-kolben pistal, preformance racing nocken, kopfbearbeitung 47-41 deinerseits und termignoni racing 2-1 auspuff. mit 101 ps am hinterrad mit original airbox und k&n filter, nach airbox umbau dann 108 hinterrad ps und bis zu 11 nm mehr ! gruß tony spiesz (Veröffentlicht am 06.02.2010)

    14. Kommentar zu Headporting 47-41... Kundenmeinung von Paul Bingeli,Schweiz
      Gesamteindruck

      Kommentar zu Headporting 47-41 : Hallo Rüdiger Besten Dank für die Lieferung. Die Köpfe schauen gut aus. Besten dank ! und grüße Paul (Veröffentlicht am 05.01.2010)

    15. Kommentar zu 1000/1100 Tuning ... Kundenmeinung von Robert Andorf,Deutschland
      Gesamteindruck

      Kommentar zu 1000/1100 Tuning mit Headporting 47-41 : \"Hallo Rüdiger, ich denke mal Ihr habt an der richtigen Stelle an meiner Monster rumgeschraubt! Die Gasannahme, die Fahrcharakteristik ist einfach nur geil. Mit den Dunlop´s bin ich Fahrwerkstechnisch noch nicht ganz zurechtgekommen. Ich habe meine 7 Runden Rennzeit von damals 1000 ccm ( 95 Ps Hinterradleistung ) in Brünn um 32 sek. !!! gesteigert. Im Kurvenausgang war ich wegen dem fetten Drehmoment noch einwenig verhalten.( Lausitz 2008 Highsider !) Ich denke das ich noch eine Menge Potential und Spaß mit Deinem Umbau habe. Grüße von einem Super Hochzufriedenen Kunden Robert\" (Veröffentlicht am 30.10.2009)

    16. these guys know what there tal... Kundenmeinung von jarno
      Gesamteindruck

      these guys know what there talking about...own a \"kaemna\" tuned ducati supersport 1000 ,runs like hell,original bore but reworked porting,balancing of crankshaft,performance cams...all good for 105HP at the back wheel. nice job guys thanks (Veröffentlicht am 28.09.2006)


    Schreiben Sie Ihre eigene Kundenmeinung

    Sie bewerten den Artikel: Kanalbearbeitung 47-41/1000/1100 ccm Motoren 2 V, Paar

    Wie bewerten Sie diesen Artikel? *

      1 Stern 2 Sterne 3 Sterne 4 Sterne 5 Sterne
    Gesamteindruck
    • Reload captcha
CMS tab

Sie könnten auch an folgenden Artikeln interessiert sein